1.) The corners right out of the box

2.) Before

3.) Remove the bolt circled in red

4.) Remove the turn signal bulb by twisting it out

5.) Pull out turn signal assembly; place on towel to avoid scratching bumper. Remove side marker light bulb plug (twist off). Remove whole signal assembly

6.) Optional step: Remove white side marker bulb from plug and replace with amber bulb (type 194NA). Attach side marker plug to new unit.

7.) Notice two small slots. Slide new assembly into place, making sure notches on assembly slide into slots.

8. Not pictured: Attach new assembly with screw provided (or can use old screw). Make sure holes are aligned. Insert turn signal plug.

9.) Now sit back and enjoy your new clean corners